pppp
Filters
Sort results
Reset
Apply
SKU | Datasheet | |||
|---|---|---|---|---|
 |
The Raspberry Pi Active Cooler for Raspberry Pi 5 is a dedicated clip-on cooling solution for Raspberry Pi 5. It combines an aluminium heatsink with a temperature-controlled blower fan to keep your Raspberry Pi 5 at a comfortable operating temperature, even under heavy loads. Single-piece anodised aluminium heatsink Heatsink-mounted, temperature-controlled blower fan attached by three screws Spring-loaded push pins for mounting onto Raspberry Pi 5 Pre-applied thermal pads for heat transfer |
|||
 |
Wildfire STM32 Development Board, STM32F103 Learning Board, F103ZET6 Microcontroller |
|||
 |
This prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 - updated for the most compatibility with just about all the Arduinos! It works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos. Yun's and Arduino Ethernets have a chunky Ethernet jack that gets in the way of stacking, you can use the stacking headers included and it will work, just doesn't sit nice and flat.
Check out these awesome specifications:
|
|||
 |
Raspberry Pi 500+ puts the power of Raspberry Pi 5’s quad-core 64-bit Arm processor and RP1 I/O controller into an ergonomic and tactile mechanical keyboard, combining uncompromising performance with 16GB RAM and 256GB NVMe storage for a truly premium desktop computer experience.
2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches and a 2MB shared L3 cache
16GB LPDDR4X-4267 SDRAM
Internal 256GB Raspberry Pi SSD |
|||
 |
Wildfire Luban Cat 2 Card Computer Rockchip RK3568 Development Board Linux Learning Board |
|||
 |
BS-301N BS-801RGB Packaging Color Photoelectric Switch Color Mark Sensor |
|||
 |
QC4.0 full-protocol mobile phone fast charging module 100W pd3.0 supports Huawei SCPFCP |
|||
 |
1.54/2.13/2.90 inch E-paper/flexible e-ink screen modules (black and white/red and white/e-paper screen |
|||
 |
STM32 development board, learning board, STM32F767IGT6 core board, development board, |
|||
 |
The everything computer. Optimised. With 2–3× the speed of the previous generation, and featuring silicon designed in‑house for the best possible performance, we’ve redefined the Raspberry Pi experience. RP1Raspberry Pi 5 is built using the RP1 I/O controller, a package containing silicon designed in-house at Raspberry Pi. USB 3 has more total bandwidth, for much faster transfer speeds. Camera and DSI display connectors are interchangeable, so you can have one of each, or two the same. Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches and a 2MB shared L3 cache VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.3 Dual 4Kp60 HDMI® display output with HDR support 4Kp60 HEVC decoder LPDDR4X-4267 SDRAM (1GB, 2GB, 4GB, 8GB, and 16GB) Dual-band 802.11ac Wi-Fi® Bluetooth 5.0 / Bluetooth Low Energy (BLE) microSD card slot, with support for high-speed SDR104 mode 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation 2 × USB 2.0 ports Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT) 2 × 4-lane MIPI camera/display transceivers PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter) 5V/5A DC power via USB-C, with Power Delivery support Raspberry Pi standard 40-pin header Real-time clock (RTC), powered from external battery Power button |